Before installation
Review the confirmed electrical specification, connections, dimensions and service clearances. Plan suitable ventilation and condensate drainage, and follow the supplied operating instructions for installation and commissioning.
Model and series reference images. Appearance and components depend on the selected configuration.
MATEOU / SJKW
SJKW-1
Micro-Heat Regenerative Desiccant Air Dryers
- Rated air flow capacity
- 1.5 m³/min / 53 CFM
- Working pressure
- 6–10 bar / 87–145 psi
- Maximum inlet temperature
- ≤ 45°C
Compare rated air flow capacity, working pressure and inlet conditions, then confirm the dryer configuration.
← Compare SJKW SeriesPRODUCT DESCRIPTION
SJKW-1 / Micro-Heat Regenerative Desiccant Air Dryers
SJKW-1 has a rated air flow capacity of 1.5 m³/min / 53 CFM. Heated-purge desiccant air dryers with micro-heat regeneration for applications requiring a lower pressure dew point. Nine selected models are shown; heatless configurations can be discussed on request.
Match SJKW-1 to the compressor delivery at the actual working pressure. Its rated air flow capacity is 1.5 m³/min / 53 CFM. Inlet and ambient temperature, the required pressure dew point and the upstream air condition must be checked before the dryer configuration is confirmed.
Discuss desiccant drying for moisture-sensitive pneumatic processes, instrumentation and installations with a specified low pressure dew point. Air-quality requirements for direct product contact must be evaluated for the complete treatment system.
FEATURES
Equipment at a glance.
- Micro-heat regenerative drying
- Twin-tower desiccant arrangement
- Heatless alternatives available on request
SPECIFICATIONS
Technical details.
Configuration confirmed
with your equipment quotation.
| Model / component | SJKW-1 |
|---|---|
| Equipment type | Micro-Heat Regenerative Desiccant Air Dryers |
| Rated air flow capacity | 1.5 m³/min / 53 CFM |
| Working pressure | 6–10 bar / 87–145 psi |
| Configuration | Micro-heat |
| Maximum inlet temperature | ≤ 45°C |
| Catalogue voltage | 220 V / confirm supply |
| Catalogue power reference | < 1.5 kW |
| Pressure dew point | Confirmed for the selected configuration |
| Air connection | G 3/4 |
| Dimensions / L × W × H | 800 × 350 × 1080 mm |
| Catalogue weight | 105 kg |
DRYER SELECTION
Account for your inlet conditions.
Rated air flow capacity is the compressed-air flow the dryer can treat. Final sizing depends on the rating basis, working pressure, inlet and ambient temperatures, and required pressure dew point. For desiccant dryers, include regeneration air when checking net flow to production.
Heatless desiccant configurations can be supplied on request.
Catalogue values are references. Confirm final dimensions, components and performance for the selected configuration before order.
INSTALLATION & MAINTENANCE
Prepare for dependable operation.
Routine care
Follow the selected dryer maintenance instructions. Check drains, filtration and the cooling or regeneration arrangement as applicable. Record running conditions and arrange replacement consumables for the actual configuration.
When you need support
Send the model and serial number, nameplate photo, operating conditions and a clear description of the issue. Include any controller alarm and relevant photos or video. This information helps identify the appropriate technical guidance or replacement component.
WARRANTY & SUPPORT
Confirm the details
before you order.
MATEOU offers a two-year equipment warranty. Applicable coverage and terms are confirmed in your quotation and order documents. Request operating information, maintenance guidance and the appropriate consumables for your selected configuration.
Request current exterior, internal, detail and main-component photos of the selected equipment configuration.