Industrial compressed air / MATEOU
MATEOU / EQUIPMENT
SZG all-in-one air compressors supply compatible 3000W (3 kW) and 6000W (6 kW) fiber laser cutters. Each package includes a compressor, refrigerated dryer, receiver, precision filters and electronic drains. Listed performance data are at 15.5 bar. For a 16 bar working-pressure requirement, ask MATEOU to confirm the compressor and air-treatment configuration.
Laser Cutting / Configuration to suit your requirements
EXPLORE BY POWER & MODEL
All-in-one laser cutting air compressors / 15–37 kW
TECHNICAL OVERVIEW
Model-specific values are confirmed
with your equipment quotation.
| Specification | Equipment / configuration |
|---|---|
| Motor power options | 15 kW / 22 kW / 37 kW |
| Application | 3000W / 6000W fiber laser cutting, subject to the machine air requirements |
| Working pressure | 15.5 bar listed SZG data; 16 bar requirements confirmed separately |
| Air delivery | Confirmed for the selected model |
| Air treatment | Refrigerated dryer, precision filter set and standard electronic drain valves |
| Receiver and power supply | Confirmed for the selected configuration |
| Above 6000W | 16 bar standalone compressors and separate high-pressure air treatment |
APPLICATIONS
SELECTION CHECKLIST
Confirm the cutting machine's requirements before selection. Working pressure, airflow, filtration and tank specifications are provided with the quotation.
A CLOSER LOOK
SZG 4-in-1 all-in-one packages serve compatible 3000W (3 kW) and 6000W (6 kW) laser cutting applications, with 15, 22 or 37 kW motors. Listed SZG performance data are at 15.5 bar. Contact MATEOU to review a 16 bar working-pressure requirement.
For laser cutters above 6000W, MATEOU also supplies 16 bar standalone screw compressors with separate high-pressure dryers, air receivers and filters.
Select the air system from the cutting machine requirements: working pressure, airflow, air quality and operating schedule.
Allow for pressure losses through the air-treatment equipment and pipework. A compressor pressure figure alone does not establish the pressure available at the laser cutter. Share the laser manual and installation layout for a more useful selection discussion.
The all-in-one unit includes a screw air compressor, refrigerated air dryer, air receiver and a set of precision filters. Electronic drain valves are standard and discharge collected condensate automatically. Drying and filtration help control moisture, oil carryover and particles for compatible fiber laser cutting applications. The oil-injected compressor package must be matched to the laser manufacturer's air-quality requirements.
Select air delivery for the machine demand and the intended duty pattern. The appropriate size depends on simultaneous equipment use and the operating conditions as well as the laser power. Use the actual machine requirement rather than a general kW rule.
Our enclosure panels are made from thick material conforming to Chinese national standards. The rigid panels help reduce resonance and provide stable support for the enclosure. Internal thermal and acoustic insulation lining helps reduce operating noise.
For laser cutting of metal and other compatible industrial applications, confirm the cutting equipment requirements with its manufacturer. Compressor selection should account for whether compressed air is used as an assist gas, for pneumatic functions, or for both.
COMMON QUESTIONS
Laser power is useful background information, but it is not a complete compressor specification. Provide the required air pressure, airflow, air quality and operating schedule from the laser equipment manual.
A component rated for 10 bar is unsuitable for a 15.5 bar operating system. Every pressure-containing component must have an appropriate rating, and the package air-treatment configuration must be confirmed before order.
Send the laser machine model or manual, required pressure and airflow, supply voltage, planned running hours and the distance from the compressor to the cutter. Include any special air-quality requirement.
Yes, for compatible air-cutting requirements. The installation gallery shows two 3000W (3 kW) laser cutting machines and one 6000W (6 kW) machine. Select the compressor from the cutter's specified pressure, airflow, air quality and operating schedule, rather than laser wattage alone.
MATEOU can supply 16 bar standalone screw compressors and configure separate high-pressure air treatment and receiver storage. Laser power alone does not determine the required compressor size; send the cutting machine manual and the intended material, thickness and operating schedule.
The SZG 4-in-1 package combines a screw air compressor, refrigerated air dryer, air receiver and a set of precision filters. Electronic drain valves are fitted as standard. Match the complete system to the laser machine working pressure, air delivery and air-quality requirements.
LET'S DEFINE YOUR SYSTEM
Send your application, air requirements and power supply.
We will help you take the next step.